• 信息
  • 详情
  • 联系
  • 推荐
分享好友 产品首页 产品分类 切换频道
1/5
Recombinant Human Fucosyltransferase 9/FUT9 Protein, CF  20 UG图1

Recombinant Human Fucosyltransferase 9/FUT9 Protein, CF 20 UG

2024-11-24 19:39IP属地 广东省东莞市 电信00留言

9347-GT

 

Formulation Supplied as a 0.2 μm filtered solution in Tris and NaCl.





Shipping The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.


Stability & Storage:       Use a manual defrost freezer and avoid repeated freeze-thaw cycles.      

  • 6 months from date of receipt, -20 to -70 °C as supplied.

  • 3 months, -20 to -70 °C under sterile conditions after opening.


Assay Procedure

Materials

  1. Prepare 1X Assay Buffer containing 10 mM MnCl2 by combining 10X stocks and diluting 10 fold with deionized water.

  2. Dilute 1 mM Phosphate Standard provided by the Glycosyltransferase Kit by adding 40 µL of the 1 mM Phosphate Standard to 360 µL of 1X Assay Buffer for a 100 µM stock. This is the first point of the standard curve.

  3. Complete the standard curve by performing six one-half serial dilutions of the 100 µM Phosphate stock using 1X Assay Buffer. The standard curve has a range of 0.078 to 5 nmol per well.

  4. Prepare reaction mixture containing 0.16 mM GDP-Fucose, 0.6 mM Lactosamine, and 4 µg/mL Coupling Phosphatase 1 in 1X Assay Buffer.

  5. Dilute rhFUT9 to 1 µg/mL in 1X Assay Buffer.

  6. Load 50 µL of each dilution of the standard curve into a plate. Include a curve blank containing 50 μL of 1X Assay Buffer.

  7. Load 25 µL of 1 µg/mL rhFUT9 into empty wells of the same plate as the curve. Include a Control containing 25 μL of 1X Assay Buffer.

  8. Add 25 µL of the reaction mixture to all wells, excluding the standard curve. 

  9. Seal plate and incubate at 37 °C for 20 minutes.

  10. Add 30 µL of the Malachite Green Reagent A to all wells. Mix briefly.

  11. Add 100 µL of deionized water to all wells. Mix briefly.

  12. Add 30 µL of the Malachite Green Reagent B to all wells. Mix and incubate sealed plate for 20 minutes at room temperature.

  13. Read plate at 620 nm (absorbance) in endpoint mode.

  14. Calculate specific activity:

     Specific Activity (pmol/min/µg) =

Phosphate released* (nmol) x (1000 pmol/nmol)
Incubation time (min) x amount of enzyme (µg)

     *Derived from the phosphate standard curve using linear or 4-parameter fitting and adjusted for Control.

Per Reaction:

Background: Fucosyltransferase 9/FUT9

N-glycans, O-glycans and glycolipids are frequently fucosylated at terminal sites. Therefore, fucose is often part of a sugar epitope with important biological function. Well-known fucose-containing glycans include Lewis and ABO blood group antigens. Lewis epitopes are key elements involved in the leukocyte homing and extravasation process and thus are important for lymphocyte maturation and natural defense functions. Fucose-containing glycans also play critical roles in cell signaling and development (1). More than 10 fucosyltransferases have been cloned (2). FUT1 and FUT2 are alpha 1-2 fucosyltransferases and are responsible for ABO blood-group antigen synthesis. FUT8 is an alpha 1-6 fucosyltransferase that adds a fucose to the chitobiose core of N-glycans (3). FUT3, FUT4, FUT5, FUT6, FUT7 and FUT9 are alpha 1-3 or alpha 1-4 fucosyltransferases and are responsible for Lewis antigen generation. In particular, FUT9 synthesizes the Lewis X oligosaccharide (CD15) in the organ buds progressing in mesenchyma during embryogenesis and in mature granulocytes (4, 5). The activity of this enzyme has been measured with a phosphatase-coupled method (6).

举报
收藏 0
评论 0
联系方式