产品特点
详细介绍
产品名称：8710-0510开口扳手
品牌：安捷伦
型号：8710-0510
规格：Tool, wrench 1/4 inch to 5/16 inch
耗材列表查询
| Partnumber | 中文名称 | Description |
| 0100-0090 | 三通接头0100-0090 | Tee, 1/8 inch Brass |
| 0100-1853 | 安捷伦密封垫0100-1853 | Rotor seal (Vespel, 400 bar, 2 grooves) |
| 0100-2144 | 黄铜球阀 | 1/8inch Ball Valve |
| 0100-2298 | 两通/接头PEEK 0100-2298 | Adapter, PEEK int. 1/4-28 to ext. 10-32 |
| 0101-1416 | 安捷伦密封圈0101-1416 | Rotor Seal 2ps/6pt RC IV, P: A/B |
| 01018-22707 | 过滤白头01018-22707 | PTFE Frits 5PK |
| 05988-20066 | 安捷伦毛细管柱螺帽螺母 | Column Nut for MS interface |
| 07673-40180 | Agilent 07673-40180 螺蚊口瓶的瓶盖 | Diffusion caps for 4ml vials, 12/PK |
| 0890-1763 | PEEK管线0890-1763 | 1/16 od 0.007 id (0.18mm) 1.5m PEEK tbng |
| 0905-1175 | 清洗密封垫 0905-1175 | Seal, wash |
| 0905-1610 | O形圈0905-1610 | O-Ring, 2-010, Perfluoroelastomer, White |
| 19244-80560 | 可通用的FID喷嘴 | Jet, Adaptable, capillary, 0.29mm ID |
| 19251-00100 | 扳手安捷伦19251-00100 | Wrench for SSL inlet, nut angled |
| 19256-80045 | 隔热片垫圈,白色 19256-80045 | Heat Shield Gasket, Perfuoroelastomer |
| 5021-7107 | 铜管气路管5021-7107 | Copper tubing, 1/8in 12 ft length |
| 5040-4669 | 启盖器5040-4669 | Ergonomic Manual Crimper for 20mm caps |
| 5041-2168 | 玻璃过滤头5041-2168 | Glass filter, solvent inlet |
| 5062-2484 | 冲洗垫片 | Gaskets wash seal 6/PK |
| 5063-6589 | 密封垫5063-6589 | Plunger seal for 1100/1200 and 1050 2/PK |
| 5063-6591 | PEEK接头5063-6591 | Fitting-Fingertight PEEK for 1/16-in |
| 5067-4728 | 密封盖5067-4728 | Seal Cap Assembly |
| 5080-8750 | 黄铜螺帽 | Fittings 1/8inch Brass 20/PK |
| 5080-8853 | 石墨密封垫圈5080-8853 | Ferrule, 0.5mm Graphite 0.32 col 10/PK |
| 5180-4121 | 安捷伦螺帽5180-4121 | Cap, 1/8inch Brass, 6/Pk |
| 5180-4131 | 安捷伦接头5180-4131 | Reducer, Union, 1/4 x 1/8 Brass 2/PK |
| 5180-4160 | 5180-4160黄铜三通接头 | Tee, 1/8inch Brass Union 2/PK |
| 5181-1267 | 5181-1267 自动进样器 | Syringe, 10ul tapered, FN 23-26s/42/HP |
| 5181-1273 | 自动进样针5181-1273 | Syringe, 5ul tapered, FN 23-26s/42/HP |
| 5181-3360 | 自动进样针5181-3360 | Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK |
| 5181-7481 | 5181-7481黄铜三通接头 | 1/8 Nut And Ferrule Set Brass Swagelok |
| 5181-8830 | 安捷伦螺母5181-8830 | Column nut, universal 2/PK |
| 5182-0714 | 进样瓶5182-0714 | Vial,screw,2ml,clr,cert,100PK |
| 5182-0715 | 进样瓶5182-0715 | Vial,screw,2ml,clr,WrtOn,cert,100PK |
| 5182-0717 | 进样瓶盖5182-0717 | Blue screw caps 100/PK |
| 5182-0731 | 进样瓶垫5182-0731 | Septa, PTFE/red silicone, 8.7mm 100/pk |
| 5182-3465 | 梅花螺丝起子5182-3465 | Torx Screwdriver, T20 Size |
| 5183-4647 | 分流衬管5183-4647 | Liner,split,low prs drop,glswl,tpr,deact |
| 5183-4711 | 衬管5183-4711 | Lnr,gen purp split/spltls,tpr,glswl,deac |
| 5183-4757 | 进样口隔垫 | Septa Non-Stick BTO Inlet 11mm 50 pk |
| 5183-4757-100 | 进样口隔垫 | Septa Non-Stick BTO Inlet 11mm 100 pk |
| 5188-5367 | 密封垫圈5188-5367 | Gold Plated Inlet Seal with Washer |
| 5190-1483 | 进样针5190-1483 | Syringe, 10.0 uL, FN, bevel tip |
| 5190-2293 | 衬管5190-2293 | Liner,UI,splitless,sngle taper,glasswool |
| 5190-2295 | 分流衬管5190-2295 | Liner,UI,universal,low pressure drop,GW |
| 8710-0510 | 8710-0510开口扳手 | Tool, wrench 1/4 inch to 5/16 inch |
| 8710-0803 | 8710-0803开口扳手 | Wrench, open end 7/16in and 9/16in |
| 8710-0806 | 8710-0806开口扳手 | Wrench, open end 1/2in and 7/16in |
| 8710-0972 | 8710-0972开口扳手 | Wrench, open end 7/16in and 3/8in |
| 8710-1217 | 8710-1217螺帽手 | Nut, driver 7mm |
| 8710-1561 | 8710-1561螺帽扳手 | Nut driver, 1/4in for FID jets |
| 8710-1709 | 8710-1709 管线切割器 | Cutter, tube |
|
点赞 0 举报 收藏 0
买家评价
正在加载评价详情... 联系方式
|
