MS105 半微量天平

微信扫码

快速获得称量结果 – 价值永恒

 无论是简单的日常工作，还是复杂的称量程序，NewClassic MS半微量天平将卓越的性能和提高生产力进行了完美的结合，这一切都来源于快速的稳定时间以及一贯的可靠结果。来自瑞士的高分辨率称量技术(HRT)，保证了整个称量范围内的始终精确。创新左右手互换开关门(ErgoDoor)使样品的称量尽可能简单和方便。内置日期和时间功能，进行符合GLP/GMP规范的打印输出，确保您的研究的全面控制和可追溯性。

Limit values
Maximum capacity	120 g
Readability	0.01 mg
Repeatability (at nominal load) 1)	0.04 mg (100 g)
Repeatability (at low load) 1)	0.02 mg (20g)
Linearity deviation	0.1 mg
Sensitivity offset 2)	0.4 mg (100 g)
Typical values
Repeatability (at nominal load) 1)	0.03 mg (100 g)
Repeatability (at low load) 1)	0.015 mg (20g)
Minimum weight (according to USP)	45 mg
Minimum weight (@U=1%, 2 sd)	3 mg
Settling time	8 s
Sensitivity offset 2)	0.3 mg (100 g)
Dimensions
Weighing pan dimensions (mm)	ø 80
Balance dimensions LxWxH (mm)	358x247x331

¹⁾ Standard deviation (sd)
²⁾ Stability of sensitivity with FACT self-adjustment switched on

Feature and Benifits

Precise Results The METTLER TOLEDO HRT (HiRes Technology) includes two built-in weights. Together with FACT (Fully Automatic Calibration Technology), this allows the balance to automatically perform adjustment and linearization.
Efficient Handling Reduce the number of movements needed for every weighing. Open the draft shield ErgoDoor with one hand and simultaneously place the weighing sample with your other hand.
Space Saving Save working space thanks to split draft shield doors that do not project beyond the balance, and sideways mounted connectors at the back of the balance.
Easy Cleaning Cleaning has never been this easy: dismantle the QuickLock draft shield in a few short steps, then wash all glass panels and the drip tray in the dishwasher.