TABER磨耗试验机专用砂轮

微信扫码

今最方便的「加速耗」，用途泛。只要更不同磨件，即可行不同性的耗，合：、板、布料、行李箱、地毯、玻璃、塑料、金布、磁、油漆、料、潢建材、地板材料、高薄板、品、塑料、交通、理、、、牙科材料、汽、家俱......等。

磨磨粒分五型：

Calibrase橡和氧化磨粒性磨，用於硬的品

Calibrade陶瓷、碳化矽磨粒非性磨，用於品

羊毛磨粒需砂同用

碳化螺牙切撕，用於性材料如橡、皮革或地板等

一般情下Calibrade磨用於品，Calibrase用於硬的品。

TABER磨符合

ASTM D3884、ASTM D1175、ASTM D1044、ASTM D4060、TAPPI

T476、ISO 9352、ISO 5470-1、JIS K7204、JIS A1453、JIS

K6902、JIS L1096、JIS K6964、DIN 52347、DIN 53109、DIN

53754、DIN 53799等多

TABER磨特性：

Abrading Wheels

Taber Abrading Wheels are available in different levels of abrasiveness to suit a wide range of material testing applications.

Wheels that feature abrasive particles are available in a resilient matrix or a hard matrix of vitrified clay.

Selecting Abrading Wheels

The choice of abrading wheels for Taber Abrasers 首ld be based upon the wear the specimen material will be subjected to in actual use.

Abrading wheels for Taber Abrasers include five general types of varying abrasive quality:

• Calibrase? - a resilient wheel composed of resilient binder and aluminum oxide or silicon carbide abrasive particles

• Calibrade? - a non-resilient wheel composed of vitrified (clay) and silicon carbide or aluminum oxide abrasive particles

• Wool Felt - no abrasive particles

• Plain Rubber - no abrasive particles unless used with sandpaper strips

• Tungsten Carbide - extremely severe cutting and tearing action with helical teeth for use on resilient materials such as rubber, leather or floor covering.

The plain neoprene rubber wheel containing no abrasive grain is used for testing dental cleaning powders, dentifrice and for mounting sandpaper strips which are used as resilient wheels. These sandpaper strips must be changed after each 500 cycles of operation. The wool felt wheel is valuable in testing the wearing qualities of two fabrics in friction with one another.

NOTE: Calibrase Wheels must be used before the expiration date printed on the wheel.

Non-Resilient (Calibrade) Wheels are more easily subject to “clogging” and “crowning” and will require refacing with the Model 250 Wheel Refacer. Wheels may be refaced as often as required down to the minimum usable diameter of 1-3/4” as indicated on the wheel label.

Under ordinary conditions, a load and wheel combination 首ld run a minimum of 300 cycles on a material specimen before the end point occurs, otherwise the test may be too harsh and not correspond to normal wear.